Siemens SITRANS L Operating Instructions Manual page 53

Operating Mode
①
②
③
Operation
NO SERVICE
LEVEL
SPACE
DISTANCE
The point from which High and Low Calibration points are referenced: see Dimension
1)
drawing (Page 154) and Flange adapter versions (Page 159).
Low Calibration Point
Distance from Sensor Reference to Low Calibration Point: usually process empty level. [See
Operation (1.5.) for an illustration.]
Values
High Calibration Point
Distance from Sensor reference point to High Calibration Point: usually process full level. [See
Operation (1.5.) for an illustration.]
Values
Apply? (Apply changes)
In order to save the Quick Start settings, it is necessary to select Yes to apply changes.
Options
Press Mode
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF
Space ④
Level ⑤
Distance ⑥
Description
Measurement and associated loop current are not updated, and the device defaults
to Fail-safe mode.
Distance to material surface referenced from Low Calibration Point
Distance to material surface referenced from High Calibration Point
Distance to material surface referenced from Sensor reference point
Range: 0.00 to 20.00 m
Range: 0.00 to 20.00 m
YES, NO, DONE (Display shows DONE when Quick Start is successfully completed.)
to return to Measurement mode. SITRANS LR200 is now ready to operate.
High Calibration Point (process full level)
Sensor reference point
1)
Low Calibration Point (process empty level)
Operating
6.2 Local operation
53