Time Since Last Service (4.4.2.); Time Until Next Service (4.4.3.); Reminder Activation (4.4.4.); Reminder 1 (Required) (4.4.5.) - Siemens SITRANS L Operating Instructions Manual

Parameter assignment
7.5 Service (4.)
7.5.4.2

Time since last service (4.4.2.)

Time elapsed since last service. Can be reset to zero after performing a service. Can be reset
locally by entering 0 in this parameter.
To reset to zero:
• In SIMATIC PDM, open the menu Device – Maintenance, click on the Service Schedule
tab, and click on Service Performed to restart the timer and clear any fault messages.
• Via the handheld programmer, manually reset Time since Last Service to zero.
7.5.4.3

Time until next service (4.4.3.)

Read only. Service interval (4.4.1.) (Page 129) less Time since last service (4.4.2.) (Page 130).
7.5.4.4

Reminder activation (4.4.4.)

Note
Modifications via SIMATIC PDM
Parameter is accessed via the menus Device – Maintenance.
Factory setting:
Setting range:
Purpose:
Description:
7.5.4.5

Reminder 1 (required) (4.4.5.)

Factory setting:
Setting range:
Purpose:
Description:
130
Timer OFF
Timer OFF
ON NO LIMITS
ON REMinders 1 and 2 checked
ON REMinder 2 (Maintenance Demanded) checked
Allows you to enable a maintenance reminder.
1. First set the values in Reminder 1 (required) (4.4.5.) (Page 130) / Re-
minder 2 (demanded) (4.4.6.) (Page 131).
2. Select the desired Reminder Activation option.
0.164 years
0 to 20 years
If Time until next service (4.4.3.) (Page 130) is equal to or less than this
value, the device generates a Maintenance Required reminder.
1. Modify values as required.
2. Set Reminder activation (4.4.4.) (Page 130) to the desired option.
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF