Changing Parameter Settings Via Simatic Pdm - Siemens SITRANS LR460 Operating Instructions Manual
Radar transmitters
Hide thumbs
Also See for SITRANS LR460:
- Quick start manual (197 pages) ,
- Operating instructions manual (155 pages) ,
- Instruction manual (123 pages)
Table of Contents
Advertisement
7.6
Changing parameter settings via SIMATIC PDM
Note
For a complete list of parameters, see Parameter assignment (Page 67).
1. Launch SIMATIC PDM, connect to SITRANS LR460, and upload data from the device.
2. Adjust parameter values in the parameter value field then press Enter. The status fields read
Changed.
3. Open the Device menu, click on Download to device, then use File – Save, to save parameter
settings. The status fields are cleared.
①
Configuring a new device
To configure your device and load the newest version of the Device Description (DD), see
"Configuring a new device" under Quick start wizard via SIMATIC PDM (Page 49).
Calibrating LR460 via PDM
For a simple application, follow 4 steps to set up Quick start wizard via SIMATIC PDM
(Page 49).
For a complete list of parameters, see Parameter assignment (Page 67).
SITRANS LR460
Operating Instructions, 10/2021, A5E42035355-AB
Value fields
7.6 Changing parameter settings via SIMATIC PDM
Remote operation
61
Advertisement
Table of Contents
