Siemens SITRANS L Operating Instructions Manual page 76

Operating
6.3 Remote operation
Simulate input
Allows you to simulate the sensor value which is input to the Level Transducer Block. This
tests everything between the Level Transducer Block and Output.
1. Open the menu Device – Simulation, and select Simulation (Input).
2. To enable simulation select Fixed or Ramp.
3. If you select Ramp, enter the step length and number of steps.
4. Enter the simulated value and click on Transfer.
5. After simulation is complete, disable simulation and click on Transfer.
76
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF