Changing Parameter Settings Using Simatic Pdm; Simatic Pdm Pull-Down Menu Image - Siemens SITRANS LR260 Operating Instructions Manual
Radar transmitters ma/hart
Hide thumbs
Also See for SITRANS LR260:
- Quick start manual (225 pages) ,
- Operating instructions manual (181 pages) ,
- Application manual (2 pages)
Table of Contents
Advertisement
Operating
7.1 Operating via SIMATIC PDM
7.1.3
Changing parameter settings using SIMATIC PDM
Note
● For a complete list of parameters, see Parameter Reference (Page 73).
● Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
Many parameters are accessed via pull-down menus in PDM. See Parameters accessed via
pull-down menus (Page 65) for others.
1. Launch SIMATIC PDM, connect to device, and upload data from device.
2. Adjust parameter values in the parameter value field then Enter. The status fields
read Changed.
3. Open the Device menu, click on Download to device, then use File - Save to save settings
offline. The status fields are cleared.
7.1.4
SIMATIC PDM pull-down menu image
You have access to a number of functions via pull-down menus from the menu bar.
under Device or View.
64
SITRANS LR260 with mA/HART
Operating Instructions, 11/2019, A5E32337683-AD
Advertisement
Table of Contents
Troubleshooting
