Changing Parameter Settings Using Simatic Pdm; Parameters Accessed Via Pull-Down Menus - Siemens LR250 Instruction Manual

Changing parameter settings using SIMATIC PDM

Notes:
• For a complete list of parameters, see
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
Many parameters are accessed via the 4-level menu in PDM. See
pull-down menus
1) Launch SIMATIC PDM, connect to SITRANS LR250, and upload data from the
device.
2) Adjust parameter values in the parameter value field then click on Enter. The status
fields read Changed.
3) Open the Device menu, click on Download to device, then use File – Save to save
settings offline. The status fields are cleared.

Parameters accessed via pull-down menus

Click on Device or View to open the associated pull-down menus.
Pull-down menus
See
7ML19985JE06
below for the others.
pull-down
menus
on page 50 for a table.
SITRANS LR250 (HART) – INSTRUCTION MANUAL
Parameter Reference
Parameters accessed via
on page 81.
value
fields
Page 49