Mode (2.6.2.); Channel (2.6.3.); Label (2.6.4.) - Siemens SITRANS L Operating Instructions Manual

7.3.6.2

Mode (2.6.2.)

Used to request an operating mode from the Analog Input Function Block.
Options
Allows you to put the SITRANS LR200 into Out of Service Mode and then reset it to Automatic
Mode. Manual Mode is used in conjunction with Simulation. See Simulation (Page 74).
It should be used only with SIMATIC PDM in order to benefit from all the features available.
7.3.6.3

Channel (2.6.3.)

Used to select between the different Level Transducer Block outputs.
Options
7.3.6.4

Label (2.6.4.)

User defined label
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF
Automatic Mode (AUTO)
Manual Mode (MAN)
Out of Service (O/S)
Level/Volume, Level, Distance
* Level/Volume
Parameter assignment
7.3 Setup (2.)
111