PROFIBUS communication
E.20 Acyclic extended diagnostics (general fault codes)
E.20
Acyclic extended diagnostics (general fault codes)
In addition to the extended diagnostics available by cyclic data exchange (shown above),
further extended diagnostics are available via acyclic communications. This consists of six
bytes. See Diagnosis reply (available cyclically) (Page 207) for information on the location of
the Extended Diagnostics.
Note
Certain fault codes (identified by an asterisk [*] in the table below) will persist until a manual
reset has been performed [see Fault Reset (3.2.)].
210
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF