Material (2.3.5.); Loe Timer (2.3.6.); Calibration (2.3.7.) - Siemens SITRANS L Operating Instructions Manual

Parameter assignment
7.3 Setup (2.)
7.3.3.5

Material (2.3.5.)

Description
Options
Factory setting
Related
parameters
dK < 3.0
1)
7.3.3.6

LOE timer (2.3.6.)

Description
Values
Factory setting
Note
When a Loss of Echo occurs, Value (2.6.9.2.) (Page 115) determines the material level to be
reported when the Fail-safe timer expires. For more detail, refer to Loss of Echo (LOE)
(Page 185).
7.3.3.7

Calibration (2.3.7.)

Note
We recommend using the Quick Start wizard to configure the device.
94
Automatically configures the device to operate in the chosen application type, by
changing one or more of the following parameters: Propagation Factor, Posi-
tion Detect, and/or CLEF Range.
LIQUID
LIQUID LOW DK (low dielectric liquid - CLEF algorithm enabled
1)
LIQUID
Propagation factor (2.5.3.) (Page 103)
Position detect (2.5.7.2.) (Page 104)
CLEF range (2.5.7.4.) (Page 105)
Sets the time to elapse since the last valid reading, before the Fail-safe Material
Level is reported.
Range: 0.00 to 720 seconds
100 s
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF