Changing Parameter Settings Using Simatic Pdm; Parameters Accessed Via Pull-Down Menus - Siemens sitrans LR200 Instruction Manual
2-wire, 6 ghz pulse radar level transmitter
Hide thumbs
Also See for sitrans LR200:
- Quick start manual (276 pages) ,
- Instruction manual (194 pages) ,
- Compact operating instructions (45 pages)
Table of Contents
Advertisement
Changing parameter settings using SIMATIC PDM
Note: For a complete list of parameters, see
on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
1.
Launch SIMATIC PDM, connect to SITRANS LR200, and upload data from the
device.
2.
Adjust parameter values in the parameter value field then press Enter. The status
fields read Changed.
3.
Open the Device menu, click on Download to device, then use File – Save, to save
parameter settings. The status fields are cleared.
Parameters accessed via pull-down menus
You have access to a number of functions via pull-down menus from the menu bar under
Device or View.
For a complete list see
7ML19985JR01
SITRANS LR200 (PROFIBUS PA) – INSTRUCTION MANUAL
Pull-down menus via SIMATIC PDM
pull-
down
menus
Parameter Reference
on page 44.
on page 44. Clicking
value
fields
Page 37
Advertisement
Table of Contents
Troubleshooting
