Changing Parameter Settings Using Simatic Pdm - Siemens 7ML5431 Operating Instructions Manual

Remote operation
7.1 Operating via SIMATIC PDM
Step 4 – Ranges
Set the parameters, and click on NEXT.
Step 5 – Summary
Check parameter settings, and click on BACK to return and revise values, FINISH to save
settings offline, or FINISH AND DOWNLOAD to save settings offline and transfer them to the
device.
The message Quick Start was successful will appear. Click on OK.
7.1.5

Changing parameter settings using SIMATIC PDM

Note
• For a complete list of parameters, see Parameter Reference (Page 113).
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
76
SITRANS LR250 with mA/HART
Operating Instructions, 10/2019, A5E32220602-AG