Allocation (3.5.); Event Index (3.5.1.) - Siemens SITRANS L Operating Instructions Manual

7.4.8

Allocation (3.5.)

7.4.8.1

Event index (3.5.1.)

The numeric component of the Event Code for a Condensed Status event. Use the index
number to identify a particular event in the list below.
Event index
0
2
10
11
12
14
15
28
29
30
31
33
34
35
36
37
38
See General fault codes (Page 143) for the meaning of each event.
1)
For example:
Event Code for Loss of Echo
Event Index
To select a particular event via the handheld programmer:
1. Go to Enable (3.4.1.) and select Yes to enable Condensed Mode.
2. Go to Event Index (3.5.1.) and enter the event index number corresponding to the event.
To select a particular event via SIMATIC PDM:
1. Go to Diagnostics > Condensed Status Setup > Condensed Status Mode and select Yes to
enable Condensed Mode.
2. Go to Diagnostics > Condensed Status.
3. For each event, you can select either the Status or the Diagnosis line, then choose a Status
or Diagnosis option from the associated pull-down menu.
SITRANS LR200 with PROFIBUS PA
Operating Instructions, 07/2021, A5E32337680-AF
Event code Event description
S0 Loss of Echo
S2 No Tech Power
S10 Level Transducer Block (LTB) Scale
S11 Internal Temperature Sensor
S12 Internal Temperature High
S14 AIFB1 PV Range
S15 AIFB2 PV Range
S28 Memory RAM
S29 Memory EEPROM
S30 Memory EEPROM Flags
S31 Memory Flash
S33 Internal Temperature Calibration
S34 Velocity Calibration
S35 Receiver Init Calibration
S36 Receiver Calibration
S37 Technology Module Calibration
S38 Technology Module Ramp
= S0
= 0
Parameter assignment
1)
7.4 Diagnostics (3.)
119