Precautions Before Starting Machining - Mitsubishi Electric MELDAS C6 Programming Manual

3. Data Formats
(Note 6) Whether the modal is initialized differs for each reset input.
(1) "Reset 1"
(2) "Reset 2 "and "Reset and Rewind"
(3) Reset at emergency stop release
(4) When an automatic reset is carried out at the start of individual functions, such as
CAUTION
The commands with "no value after G" will be handled as "G00".

3.9 Precautions before starting machining

Precautions before starting machining
CAUTION
When creating the machining program, select the appropriate machining conditions so that the
machine, NC performance, capacity and limits are not exceeded. The examples do not allow
for the machining conditions.
Carry out dry operation before actually machining, and confirm the machining program, tool
offset and workpiece offset amount.
The modal is initialized when the reset initialization parameter (#1151 rstinit) is ON.
The modal is initialized when the signal is input.
Conforms to "Reset 1".
reference point return.
Conforms to "Reset and Rewind".
16
3.8 G code lists