Mitsubishi Electric MELDAS C6 Programming Manual page 139

12. Tool Offset Functions
Manual interrupt
(1) Interrupt with manual absolute OFF.
The tool path is shifted by an amount
equivalent to the interrupt amount.
(2) Interrupt with manual absolute ON.
In the incremental value mode, the
same operation results as with manual
absolute OFF.
In the absolute value mode, however,
the tool returns to its original path at the
end point of the block following the
interrupted block, as shown in the
figure.
12.3 Tool radius compensation
Tool path after interrupt
Interrupt
Interrupt
Interrupt
131
Tool path after
compensation
Program path