Mitsubishi Electric MELDAS C6 Programming Manual page 222

13. Program Support Functions
Number of workpiece machining times
The n
umber of workpiece machining times
By substituting a value in these variables, the number of workpiece machining times can be
changed.
Type
Number of workpiece
machining times
Maximum workpiece
value
(Note) Always substitute a positive value for the number of workpiece machining times.
Tool life management
(1) Definition of variable numbers
(a) Designation of group No.
#60000
The tool life management data group No. to be read with #60001 to #64700 is designated
by substituting a value in this variable. If a group No. is not designated, the data of the
group registered first is read. This is valid until reset.
(b) Tool life management system variable No. (Read)
#60001 to #64700
(c) Details of data classification
Data class
The group No., L System method, and life data are common for the group.
Variable No.
#3901
#3902
# ? ? ? ? ?
M System
00 For control
05 Group No.
10 Tool No.
15 Tool data flag
20 Tool status
25 Life data
30 Usage data
Tool length
35
compensation data
Tool radius
40
compensation data
45 Auxiliary data
13.5 User macro specifications
can be read using variables #3901 and #3902.
Data setting range
0 to 999999
+ Variable No. or data type
Data class
6: Tool life management
L System
For control
Group No.
Tool No.
Method
Status
Life time/No. of times
Usage time/No. of
times
–
–
–
214
Remarks
Refer to following types
Refer to registration No.
Refer to registration No.
Refer to registration No.
Refer to registration No.
Refer to registration No.
Refer to registration No.
Refer to registration No.
Refer to registration No.
Refer to registration No.