Mitsubishi Electric MELDAS C6 Programming Manual page 238

13. Program Support Functions
Machining program display
[In execution] N3 G00 X-100. Y-100. ;
[Next command]N6 G01 X#101 Y#102
[In execution]
[Next command]
F800 ;
N3 G00 X-100. Y-100. ;
N4 #101=100.
∗COS [210.] ;
230
13.5 User macro specifications
N4, N5 and N6 are processed in parallel
with the control of the executable
statement of N3, N6 is an executable
statement and so it is displayed as the next
command. If the N4, N5 and N6 analysis is
in time during N3 control, the machine
movement will be continuously controlled.
N4 is processed in parallel with the control
of the NC executable statement of N3, and
it is displayed as the next command. N5
and N6 is executed after N3 has finished,
and so the machine control is held on
standby during the N5 and N6 analysis
time.