Mitsubishi Electric MELDAS C6 Programming Manual page 276

13. Program Support Functions
Detailed description
(1) When the "!nLl" code is issued from the part system "i", the operation of that program will wait
until the "!iLl" code is issued from the part system "n".
When the "!iLl" code is issued, the programs of both part systems "i" and "n" will start running
simultaneously.
(2) Synchronizing among three part systems is as follows. When the "!n!mLl" command is issued
from the part system "i", the program of part system "i" operation will wait until the "!i!mLl"
command is issued from the part system "n" and the "!i!nLl" command is issued from the part
system "m".
When the synchronizing commands are issued, programs of part systems "i", "n" and "m" will
start operating simultaneously.
13.13 Synchronizing operation between part systems
Part system "i"
program
Pi 1
!nLl;
Synchronized
operation
Pi 2
Pi 1
Waiting
Part system "i"
Pn 1
Part system "n"
Part system "m"
Part system "i"
program
Pi 1
!n!mLl;
Synchronized
operation
Pi 2
Pi 1
Waiting
Part system "i"
Pn 1
Waiting
Part system "n"
Pm 1
Part system "m"
Simultaneous start
268
Part system "n"
program
Pn 1
!iLl;
Pn 2
Pi 2
Simultaneous start
Pn 2
Pm 1
Part system "n"
program
Pn 1
!i!mLl;
Synchronized
operation
Pn 2
Pi 2
Pn 2
Pm 2
Part system "m"
program
Pm 1
Part system "m"
program
Pm 1
!i!nLl;
Pm 2