Mitsubishi Electric MELDAS C6 Programming Manual page 27

5. Position Commands
(3) Since multiple commands can be issued in the same block, it is possible to command specific
addresses as either absolute values or incremental
values.
N 4 G90 X300. G91 Y100.;
The X axis is treated in the absolute
value mode, and with G90 is
moved to the workpiece coordinate
system 300.mm position. The Y axis is
moved +100.mm with G91. As a result,
Y moves to the 200.mm position. In terms of the next block, G91 remains as the
modal and
becomes the incremental value mode.
(4) When the power is turned ON, it is possible to select whether you want absolute value
commands or incremental value commands with the #1073 I_Absm parameter.
(5) Even when commanding with the manual data input (MDI), it will be treated as a modal from
that block.
5.1 Position command methods
19
Y
200.
N4
100.
W 100. 200.
X
300.