Mitsubishi Electric MELDAS C6 Programming Manual page 75

7. Feed Functions
Relation with other functions
Function
Cutting feed override
Override cancel
Speed clamp
Dry run
Synchronous feed
Thread cutting
G31 skip
Machine lock
Machine lock high speed
G00
G01
G02, G03
7.10 Automatic corner override
Override at corner
Automatic corner override is applied after cutting feed override
has been applied.
Automatic corner override is not canceled by override cancel.
Valid after automatic corner override
Automatic corner override is invalid.
Automatic corner override is applied to the synchronous
feedrate.
Automatic corner override is invalid.
Program error results with G31 command during tool radius
compensation.
Valid
Automatic corner override is invalid.
Invalid
Valid
Valid
67