Mitsubishi Electric MELDAS C6 Programming Manual page 107

12. Tool Offset Functions
Tool offset memory
There are two types of tool offset memories for setting and selecting the tool offset amount. (The
type used is determined by the machine maker specifications.)
The offset amount or offset amount settings are preset with the setting and display unit.
Type 1 is selected when parameter "#1037 cmdtyp" is set to "1", and type 2 is selected when set to
"2".
Type of tool offset
memory
Type 1
Type 2
Classification of length
offset, diameter
compensation
Not applied
Applied
Shape
Wear
amount
Tool diameter
compensation
99
12.1 Tool offset
Classification of shape offset,
wear compensation
Reference
Reference
tool
Shape
Tool length
offset
Wear amount
Not applied
Applied