Table of Contents
Advertisement
ICP-CC408 | Installation Guide | 6.0
6.2.5
Change Telco Arming/Disarming
Sequence
This function allows you to program the call forward
sequence to operate automatically when you arm the
system in AWAY Mode. This feature is available
only if the call forward option is available from your
telecommunication provider.
When arming the system in AWAY Mode, the
control panel automatically dials the
telecommunication exchange to redirect all calls to
your mobile phone, pocket pager, or answering
service. When activated, your telephone still allows
outgoing calls.
Contact your telecommunications provider for more
information on call forward operations.
Table 36: Telco Arming/Disarming Dialing
Digits
Digit
Number to
Required
Program
0
0
1
1
2
2
3
3
4
4
5
5
6
6
7
7
Table 37: Codepad Indicators When Changing
Telco Arming/Disarming Sequence
Zone Indicators
Digit
1
2
3
4
0
1
X
2
X
3
X
4
X
5
6
7
8
9
X
11
X
12
X
Pause
X
Break
X
15
Bosch Security Systems, Inc. | 12/08 | F01U089463-02
System Functions
Digit
Number to
Required
Program
8
8
9
9
10
0
11
* 1
12
* 2
4 sec pause
* 3
break
* 4
15
* 5
MAINS
5
6
7
8
Indicator
X
X
X
X
X
X
X
X
X
X
X
X
To program the Telco arming sequence – easy
call forward (no answer on):
1. Enter your Master Code and press [3][AWAY].
Three beeps sound and the STAY and AWAY
indicators flash.
2. Press [1][AWAY] to change the Telco arming
sequence. Three beeps sound.
If a call forwarding sequence is already
programmed, the sequence appears one digit at a
time using the remote codepad indicators. Refer
to Table 37 on page 36 for the indicators and
their meanings.
If there is no call forward sequence programmed,
an additional two beeps sound after entering this
mode. These two beeps normally sound after the
last digit of the call forward sequence is
displayed.
3. Press [STAY][1 6 1] and enter the phone number
to which you want calls from the control panel
diverted.
4. Press [STAY][2][AWAY].
Two beeps sound and the system returns to the
disarmed state.
Example
If you want to automatically divert all unanswered
incoming calls to another telephone number (for
example, 9672 1777) when the system is armed in
AWAY Mode, enter:
[2 5 8 0 3][AWAY][1][AWAY][STAY]
[1 6 1 9 6 7 2 1 7 7 7][STAY][2][AWAY]
You can suspend the Telco arming sequence at any
time. To disable the Telco arming sequence:
Enter you Master Code and press [3][AWAY][1]
[AWAY][STAY][4][AWAY].
To program the Telco disarming sequence – easy
call forward (no answer off):
1. Enter your Master Code and press [3][AWAY].
Three beeps sound and the STAY and AWAY
indicators flash.
2. Press [2][AWAY] to change the Telco disarming
sequence.
Three beeps sound.
If a Telco disarming sequence is already
programmed, the sequence appears one digit at a
time using the remote codepad indicators. Refer
to Table 37 for the indicators and their meanings.
If no Telco disarming sequence is programmed,
an additional two beeps sound after entering this
mode. These two beeps normally sound after the
last digit of the sequence is displayed.
3. Press [STAY][2 6 1][STAY][2][AWAY].
Two beeps sound and the system returns to the
disarmed state.
EN | 36
Advertisement
Table of Contents
