Codepad Indicators; Zone Indicators; Away Indicator; Stay Indicator - Bosch Solution 880 Operating Manual

CC408 | Operators Guide | 4.
4.

Codepad Indicators

Figure 1: CP5 Eight Zone LED Codepad
Figure 2: CP5 Eight Zone LCD Codepad
The codepad is the communications interface
between you and your alarm system. Use the
codepad to issue commands. The codepad offers
both visual and audible indications that guide you
through the general operation.
The codepad incorporates numerous indicators.
There are zone indicators that show the condition of
each zone and four other indicators for general
status. The following pages outline a list of situations
and the relevant indicators that are seen.
4.1

Zone Indicators

The zone indicators (1 to 8) display
1 2 3 ....
the status of the zones. Table 2 lists the
various situations that the indicators
display (such as, Zone Sealed/Zone
Unsealed).
Table 2: Zone Indicator
Zone Indicator
On
Off
Flashing Fast
(0.25 seconds on/
0.25 seconds off)
Flashing Slow
(1 second on/
1 second off)
Bosch Security Systems | 5/04 | 920050O.OG.112
Codepad Indicators
Definition
Zone is unsealed.
Zone is sealed.
Zone is in alarm condition.
Zone is manually isolated or
selected to be isolated.
4.2

AWAY Indicator

The AWAY indicator displays the
system is armed in AWAY Mode. The
AWAY indicator also flashes in unison
with the STAY indicator when
programming various options
throughout the Operators Guide.
See Section 5.1 Arming in AWAY Mode
for information on the different
methods of arming the system in
AWAY Mode.
Table 3: AWAY Indicator
AWAY Definition
Indicator
On System is armed in AWAY Mode.
Off System is not armed in AWAY Mode.
4.3

STAY Indicator

The STAY indicator displays the system
is armed in STAY Mode 1 or STAY
Mode 2. The STAY indicator also flashes
in unison with the AWAY indicator
when programming various options
throughout the Operators Guide.
See Section 5.2 Arming in STAY Mode 1 for
different methods of arming in STAY
Mode 1. See Section 5.3 Arming in STAY
Mode 2 to arm in STAY Mode 2.
Table 4: STAY Indicator
STAY Definition
Indicator
On System is armed in STAY Mode 1 or
STAY Mode 2.
Off System is not armed in STAY Mode 1
or STAY Mode 2.
Flashing twice Zone Isolating Mode or setting STAY
a second Mode 2 zones.
Flashing once Day alarm status – day alarm turned
every 3 on.
seconds
4.4

System Disarmed

This indicator displays with the
indicator when the system is disarmed.
EN | 6