Stake Out (Road) - Titan TTS2 Manual

In the "Roadway" menu, select "Re-define (V)" to enter the
interface of "Define (V)-Begin":
After inputting the "Mark", "Height" and "Len." (Length), press
[Enter] to confirm, and enter the interface of the point 01 input, as
hown in picture below:
Then, you can input the "Mark", "Height" and "Len." for other
points in order. Finally, press [ESC] to end inputting and enter the
interface of "List of V curve". The operations of the key about
[Save],[View] and [Add] refer to element method.
After finishing defining H and V curve, the last input will be
saved in the buffer cache and will be erased when shutting the
instrument down. The data can be used to staking out roadway
immediately if needed.

10.2 Stake out (road)

You can used the inputted or imported LS files in staking road
way. When staking out roadway, you can select the desired file any
97