Offset (Dist2) - Titan TTS2 Manual

angle offset. After input the known distance, press [ENT] to enter the
interface of "Offset (dist1)-Prism" :
After measuring, press [Enter] to enter the result interface:
Display the coordinates or offset point. Pressing [Next P] to
measure next point; press [Save] to save the coordinates of offset
point; press [ESC] to exit.

8.3 Offset (Dist2)

It is specifically useful when the measured point is exactly on
the line of the two measurable points, as well as the distance between
measured point and the two measuring point is known.
Firstly, input the offset distance. If the directions of "P1-A0" and
"P0-P1" are same, the distance value is positive, otherwise it is
negative.
In the menu of "Offset", select "3. Offset (Dist2)" to enter the
interface of "Offset (Dist2)":
47