Export; Export To Pc - Titan TTS2 Manual

the data in the U disk will be saved in to the instrument until finishing
importing.

9.3.3 Export

Select [Fileman]→[3](Export), as shown in picture below:

9.3.3.1 Export to PC

Select [1] to enter the interface of "Export data", as shown in
picture below:
Taking an example for measured data, press [1] to enter the next
interface, you need to input the measurement file you want to export
or press [F2] to retrieve.(you may not input extension ,the file when
exported will defaults it's format as ".MEA");
After selecting the measured file, press [Enter] or [ENT] to enter
the interface of "Select format". The format of "Sunway" that the
transmission software our instrument equipped can receive and
analysis. But the format of "SSS" means the format of Topcon
(GTS-7), which you can't use the t transmission software our
instrument equipped to receive. You must use "Topcon link"
software or other can recognize "SSS" format.
73