Table of Contents
Advertisement
Info.
Settings
STA
BSS
Meas
Save
Comp.
Light
Para.
Displays the name, code and coordinate of the
current station and back-sight station.
Set the height of the instrument and the target
Enter coordinates of the station where instrument is
placed.
Enter coordinates of the point where the target is.
Start rangefinders to measure distance
Start rangefinders when being under the Coordinate
and Distance mode. Then save the result of this
measurement and name of point which is added by
one automatically. The result cannot be saved when
the compensator is over .(Tilt over)
Display the inclination (tilt) of the vertical axis
Turn on or off the backlight and the illuminating
brightness of reticle (at the same time).
Set the atmospheric parameters, prism constant and
signals.
16
Advertisement
Table of Contents
