Table of Contents
Advertisement
3) After pressing [Enter] , the point will be listed in the area
measurement list , as shown in picture below:
4) The same way above, input the other points, which will be
listed to area measurement list;
The maximum of points is 20.(The coordinates in the list may be
displayed incomplete because of the screen). The inputted or
measured coordinate is inserted below the indicator column, which
determines the shape of the formed area. The area enclosed is the
connection of line from start to end one by one in order. Thus, you
may not get the correct area, if the graphic of area has crossed line.
You may press [★] key to check the shape of the area.
84
Advertisement
Table of Contents
