Resection; Mlm - Titan TTS2 Manual

9.4.2 Resection

For the following steps, see reference in chapter 9.2.3 Resection.

9.4.3 MLM

Measure the horizontal distance (dHD), slope distance (dSD),
elevation difference (dVD) and azimuth angle (dHD) between two
target. You may also input the coordinate or retrieve coordinate from
files to calculate the value.
There are two modes of 'MLM':
1.MLM (A-B,A-C): measure A-B, A-C, A-D.... i.e the starting
point is the reference point of all following points.
2.MLM (A-B, B-C): measure A-B, B-C, C-D.... i.e the previous
point is the reference point of all the other points.
You may also have to choose 'Consider Grid scale' or to 'Ignore
Grid scale' before choosing measurement mode.
MLM (A-B, A-C):
1) Enter the interface of 'MLM(A-B,A-C)-Step 1';
2) Press [T.H] to input coordinates , then press [ENT] to enter
the interface of "MLM(A-B,A-C)-Step 2";
Diagram of "MLM"
81