Distance Measurement Mode - Titan TTS2 Manual

F2
F3
F4
The key [★] is used to set contrast, light, compensator and

parameters of distance measurement . It can work under the
basic modes.

2.3.2 Distance measurement mode

Page Soft key
1 F1
F2
F3
F4
F1
F2
F3
2
F4
right/ clockwise) and HL (horizontal
R/L
left/ anticlockwise) mode
angle（Vh）, Zenith（Vz）
VA
3/3
key functions.
Reference
Save
record the measured data into the selected
files (measurement file 'File(.MEA)' and
coordinate file 'File(.COO)'are selected
in surveying function ).
Start Distance Mode
Meas
Switch between four distance
Mode
measurement mode (single accurate
measuring (sngl)/ repeated accurate
measuring (rept)/ continue accurate
measuring (cont)/ tracking (track))
Display the second page of the soft key
P1/2
functions
Start offset measurement (eccentric
Offset
measurement)
Start staking out
Stake
Switch distance units between meters,
m/f/i
feet, feet&inch.
Display the first page of the soft key
2/2
functions
Switch between HR (horizontal
Vertical Angle Mode (altitude
Display the first page of the soft
Function
Start distance measurement and
18