3.10 Setup of Automatic Shutdown
Refer to the operation "Menu→5.Options→3.Other options→2.
Auto shut off". The interface as shown in picture below:
You may choose 'Never' to cancel the auto shutdown. When
choosing 5, 10, 20 minutes opts, the instrument will shut down
automatically if there is no key pressed. Use the [▲] or [▼] keys to
move indicator '[]' up and down to the option wanted. Press soft key
[Enter] or [ENT] to save the setting. Pressing [ ESC ] will result in no
changes of settings.
3.11 Set rectangle beep
Refer to the operation "Menu→5.Options→3.Other options→3.
Rectangle Beep". The interface as shown in picture below:
3.12 Set up the Addictive Constant and the
Multiplying Constant
Refer to the operation "Menu→F4→2.Config→1.Add const &
2.Mul.const".
The constants are already set through strict measurement when
being sold. You don't need to adjust the setting. You may alter the
26