mode and coordinate measurement mode is common. You can input
or change the station point or orientation angle.
The two methods of setting station are as followed:
1) Set station by using the data in memory;
2) Input directly by keyboard;
Three methods of the orientation angle of backsight point are
followed:
1) Set backsight point by coordinate in memory;
2) Input the coordinate of backsight point directly;
3) Input the orientation angle directly;
9.1.3.1 Example for set station
The operations of set station by using the data in memory:
1) Enter the interface of "Set STA" with original data
displayed;
2) Press the key [F4](STA);
3) Press [F1](Input);
4) Input point name, and press [F4];
54