Titan TTS2 Manual page 16

SD
N
E
Z
m
ft
fi
M
X
Y
Z
MdHD
Reference functions of common soft key
Soft key
reference
B.S
Clear
Enter
Input
M.Pt
K.Pt (Known)
Search
View
Slope distance. dSD is to stake out differences between
slope distances.
Northing. dN is to stake out differences between
north-coordinates.
Easting. dE is to stake out differences between
East-coordinates.
Elevation. dZ is to stake out differences between
Z-coordinates
EDM(Electronic Distance Measurement) is in progress.
Unit in meters (metric units)
Units in feet
Units in American feet
Units inMIL
The magnitude of which is along the baseline in a point
projection measurement. The positive direction is from the
starting point to the terminal.
The magnitude of which deviates from the base line
horizontally in a point projection measurement.
Altitude of the target in a point projection measurement.
Maximum error of evaluated distance
(Backspace)Delete one last character on the left of
the inserter in the edited column.
Delete all typed in the edited column.
End up the input in the current edited column and the
inserter goes to the next column. If there's only one
or no edited column in the dialogue box, the soft key
'Enter' is also used to accept the input and exit the
dialogue box.
Go to Coordinate dialogue box and enter the
coordinates with keyboard
Retrieval coordinates of points from measured file
call coordinates of points from coordinate file
List the points in the current coordinate file to
provide to select the number for you.
List out details of the current record
Functions
15