Notice For Using U Disk - Titan TTS2 Manual

1) The order of the
keys:[1]→[2]→[3]→[·]→[4]→[5]→[5]→[6];
2) The result is as shown below:
3) After completing the input, press [F4] to confirm the input
or press [ESC] to cancel it. If it is over "360°", a prompt
box will appear "Overtop!".

4.8 Notice for using U disk

The machine supports up to 8G U disk read and write, when
running the program, don't insert or pull out the U disk. If you pull
out the U disk when the instrument checking it, the subsequent
operations may cause error!
34