Functional Keys Under The Basic Measurement Mode; Angle Mode (Including Three - Titan TTS2 Manual

2.3 Functional keys under the basic measurement
mode
2.3.1 Angle mode (including three pages)
Page Soft key
F1
F2
F3
1
F4
F1
2
F2
F3
F4
F1
Reference
Save
selected file.
0set
by inputting ,but the angle should not
be greater than 360°
Hset
1/2
soft key functions
Hold readings.
Rep angle
and slop
V%
key functions
2/3
horizontal angle is 0°, 90°,180°，
H-Bz
270°
Function
Record the measured angle to the
Set the horizontal angle as 0°
Set your desired horizontal angle
Display the second page of the
Lock the horizontal angle
Repeat to measure the horizontal
Switch between Vertical angle
Display the third page of the soft
Set the beep on or off when the
17