Setting Station And Bss(Backsight Point); Stake Out Road - Titan TTS2 Manual

10.2.2 Setting station and BSS(backsight point)

See reference in setup BSS and setup station

10.2.3 Stake out road

Before staking out Roadway, please first enter the parameters
required for staking out. e.g starting mileage, space between, "L
dist"(left distance), "R dist"(right distance), "L dV" and "R dV".
After inputting, press [ENT] to enter 'Roadway- Center'
interface (if all deviations are zero):
The soft key functions under this page are as followed:
Key
F1 Setup any mileage and target height
F2 No use in this page
F3 calculate the coordinate of the staked out point first
▲ Current mileage minus space to obtain new mileage
▼ Current mileage plus space to obtain new mileage
◄ Switch between 'Roadway-Right' →'Roadway-Center'
→'Roadway-Left'
► Switch between 'Roadway'-Left'→ 'Roadway-Center'
→'Roadway-Right'
This interface displays the mileage of the mark. You can press
[ESC] to exit or Press [S.O] to enter the interface setting put point
information as following:
Explanation
99