Area Measurement - Titan TTS2 Manual

point. Press [ENT] to end inputting and enter the measurement
interface of "Coord.Z-No.1";
3) Press [Meas] to start measuring. After measuring, the
measured value will be displayed, and you can press [Enter]
to confirm
[Next] ,[Mode]and [Calc] appears. You can press [Next] to
continue the measurement , or [Calc] to enter the interface
of "Coord.Z-Result";
Then you can press [SetZ] to set the Z coordinate of station, or
[Set A] to set the backsight angle, and you can press [ESC] to exit
thus function.

9.4.5 Area measurement

This function is to help you to calculate out the area of the plane
figure formed by measured or inputted coordinates.
1) Press [MENU]→[4](Program) →[4](Area) to enter the
interface of area measurement';
2) Select [Input] to input point information, here, you can
retrieve point;
this measurement,
83
then the keys