Resection - Titan TTS2 Manual

4) After measuring, the measured coordinates is displayed. You
can press [F4](Yes) to save the measured value, and the
point name will be added 1;
[Yes] →

9.2.3 Resection

Set up instrument on a new point, and measure at most 5 known
points to calculate the coordinates of this new point, the measurement
of resection is as following:
●Resection by distance measurement ： Measure at least two
known points.
●Resection by angle measurement： Measure at least three known
points.
1) Enter the second interface of staking out and press
[F2](Resection);
2) Input the new point name (Pt.n),code and target height (I.H);
63