Table of Contents
Advertisement
select measured file, there will be a interface of "Select file
(.MEA)" to let you select file.), which needs you the point
name (Pt.N) ,Code and target height (T.H). The number of
"Pt.N" defaults to added 1. The code is input according to
your need, but the target height according to actual situation.
You can press [ENT] to save data to measured file.
When the compensation value is over, the instrument tips
"Tilt over!", and the angle data can't be saved.
Meas: Press [F2] to start rangefinder. The instrument will
●
calculates and display the result. If the measurement mode is
"Cont" or "Track", you can press [ESC] to stop measuring
or press [ANG] of [DIST] to switch to angle or distance
mode with the measuring stopped automatically.
Mode: It is same as distance mode.
●
Config: On the second interface, press [F1] to enter the
●
interface of inputting instrument height and target height.
After input the height, press [ENT] to receive them, or [ESC]
to exit the input interface. If you want to view instrument
and target height, just refer to this operation. The input
interface is as shown below:
The range of instrument height and target height is "±999.999".
If the input value is over, the instrument tips "Overtop!".
If you want the input value is worked when
instrument next time, just press [ENT] or [Enter] to save them into
the system file.
BSS: In the second interface , press [F2] to enter the
●
interface of input the coordinates of backsight (as shown in
picture below).Setting up "BSS" is to establish the
relationship between the earth coordinate and x coordinate
of instrument (being used together with " STA" Function).
After setting the "BSS" and pressing 'ENT',you need to aim
at backsight point. After pressing [ENT], the instrument will
calculate the azimuth angle of the backsight point, which is
displayed in the HA (horizontal angle) column. The
coordinate of the instrument is now related to that of the
earth station, which is called as 'set station').In order to
avoid repeated operation, please first operate the function of
43
turn on the
Advertisement
Table of Contents
