Table of Contents
Advertisement
Press [Meas] to start measurement. After measuring, press [Enter] to
enter the interface of "Offset (angle)-Result":
Then, aim at offset point, you can get its coordinates. Pressing
[Next P] to measure next point; press [Save] to save the coordinates
of offset point; press [ESC] to exit.
8.2 Offset (Dist1)
If have already known the front &behind and left & right offset
along the direction of observation which from measured point 'A0' to
target point 'A1' , you may measure the coordinate of A0 through
distance offset.
In the menu of "Offset", select "2. Offset (Dist1)" to enter the
interface of "Distance":
The relation between "+" and "-" is referred to the diagram of
The diagram of angle offset
46
Advertisement
Table of Contents
