interface of "Input new filename", which defaults the selected file
with with ".txt" extension;
Here, input the file name for saving the exported data, which
will be saved in the directory of "PROJECT" in the U disk. If there is
a same name file in the Udisk , it will tip.
After you pressing [F4], the measurement file will be read and
transferred to be saved with text format in the U disk.
The export of coordinate file refers to it of measurement file.
9.3.3.3 Export with Mini USB port
Connect the MinUSB cable between computer and instrument.
After connecting, the interface as shown in picture below:
On the computer, the instrument is identified as a U disk and you
can copy the files;
[Notice *]: The file "eepromd.sys" is system parameter file, which
can be cut;
After copy the work file and coordinate file, you can open them
by transport software directly. After ending the connecting, unplug
the Mini USB cable, then press [ENT] to running the program
continually.
9.3.4 Format disk
This function can re-create the file system, but can't format U
disk. After format system disk, the previous data will be all lost, you
must be careful.
9.3.5 Information of disk (MenInfo)
Display the available space of the system disk. The unit is KB. 1
KB can story 10 pieces of measurement data.
9.3.6 Update
Warning:
The following functions must be carried out under the
75