Table of Contents
Advertisement
8) When the values of "dHR", "dHD" and "dZ"(dN, dE, dZ)
are zero, the staking out is completed;
9) Press [F4] (Next P) to enter the next point stake-out. Then,
the last stake-out point will be displayed. If the last point
name is number, then the next point name will be added 1.
9.2.2 Polar coordinates
Set up the instrument on the known point, and use polar coordinate
to measure the new point.
1) Enter
[1](PolarCoord.Meas);
2) Input the new point name, code and target height;
3) Aim at mew point, and press [F4] (Meas) to start
measurement;
[Dist]
the
second
[Coord.]
interface
of
62
staking
out,
press
Advertisement
Table of Contents
