Roadway; Inputting Roadway; Horizontal Alignment; Element Method - Titan TTS2 Manual

Table of Contents

10. Roadway

Roadway function is divided into two parts: Design Roadway

and Stake out Roadway. You may stake out designed points

according to the stake and deviation of the Designed Roadway.

Select "[Menu]→4.Program→[F4](P2)→Select file

(.MEA&.COO) and press [Enter]→1.Roadway" to enter the interface

of road menu:

If you have already imported [.LS] files into the instrument from

the external, you may open the [.LS] file through '1.Open Shape file'.

You can choose the three opts after opening the LS file: 'Stake out

(road)', 'Resume H curve' or 'Resume V curve'.

The input of road design is divided two parts, one of which is the

input horizontal alignment, and the other is vertical alignment. The

input data will be saved in the selected files, whose maximum

number of element is 21, but the number of intersection cannot be

greater than 20;

The input is for road plane design.

Enter this function through 'Re-Define (H)' and 'Resume H

curve' under Roadway menu.

Selecting "Re-define(H)" to enter the interface of "Define(H)":

If you selecting "I.P"(intersection piont) for the first time, you

will input by intersection method.

Select a line type, if you don't input start point, enter the

Table of Contents