Titan TTS2 Manual page 4

term.
When transporting the instrument, you should store it in box and
be careful to avoid extrusion, collision and violent vibration. A soft
mat around the boxes is required for long-distance transport.
When setting the instrument, it's better to work with high-quality
wooden tripod for stability and measurement accuracy.
In order to improve the precision of Non-Prism measurement,
please keep the object lens clean. When cleaning exposed optical
devices, please wipe them gently with absorbent cotton or lens paper
only.
After using instrument, please sweep away the surface dust with
flannelette or hairbrush. Do not switch on the device when it has got
wet by rain. Please wipe it dry with clean soft cloth and put it in
ventilated place for a period time to make the equipment fully dry
before using and packing.
Please check out that the indicators, functions, power supply,
initial setting and correction parameters of the instrument meet the
requirements before operating.
If discovering the abnormal function of the instrument,
non-professional maintenance personnel are not allowed to
disassemble the instrument without authorization, in case of any
unnecessary damage.
As a safety precaution, do not aim at eyes directly when using
the instrument.
Security Guide
Please pay attention to the following security matters when using
the instrument with non-prism.
Warning:
Total station is equipped with rangefinders with laser level
3R/IIIa，which is recognized by the following logo recognition at the
horizon-axis locking knob" of the instrument, saying "Class 3A Laser
Product". The Total Station is classified as Class 3R Laser Product
and abides by the class of Laser Product according to IEC Standard
Publication 60825-1:2001.
For Class 3R/IIIa Laser Product, its emitted laser with
wavelength between 400nm and 700nm can be at most 5 times of that
of Class 2/II.
Warnings:
Never star at laser beam constantly, it could cause permanent eye
damage.
Precautions:
Do not see directly into laser beams nor point laser to persons.
The reflected beams is the necessary for the instrument
measurement signal.
3