Offset; Stake Out (S.o) - Titan TTS2 Manual

Press [▲] or [▼] to move the "[]" the wanted option , then press
[ENT] to save.

6.4 Offset

Press [Offset] to enter the interface of offset (will described in
the offset function).

6.5 Stake out (S.O)

Enter the distance stakeout function
The keys [F1]-[F3] is to select the stakeout mode. After selecting
the mode, input distance (HD), then press [Enter] to enter the distance
stakeout mode, and you can press [F2] to get the result of stakeout.
dsd : is to stake out differences between slope distances
measured and it expected . A positive result indicates that the
measured slope distance is great than the expectation value. The lens
should be shifted to the instrument.
dhd: is to stake out the difference between horizontal distance
measured and it expected . A positive result indicates that the
measured horizontal distance is greater than the expectation value.
The lens should be moved to the instrument.
dvd: is to stake out the difference between elevation difference
measured and it expected. A positive result indicates that the
measured elevation difference is greater than the expectation value.
The lens should be moved downwards (excavation).
Every time finishing the stakeout, press [F4] to enter the second
page , and you can press [F2] to continue staking out or press [DIST]
to return to the distance measurement mode.
m/f/i: switch the units of the distance displayed between "meter",
" feet", "feet .inch".
Other instructions: "
measurement mode. Among them, the "
with prism, and the "
" is the current distance
"indicates measuring without prism.
41
" indicates measuring