Staking Out Points - Titan TTS2 Manual

The Menu of staking out is as followed:
The 'Setup STA' and 'Setup BSS' are the preparation work for
staking out. If you have already setup them, re-setting them are not
necessary.

9.2.1 Staking out points

Two methods for staking out to be selected:
1) Retrieve the coordinates in the memory by point nane;
2) Input coordinates directly.
Example for retrieving coordinates to stake out
1) In the first page of staking out, press [3] (Stake out);
2) Press [F1] (Input) to input point name (Pt.n), then press
[Enter];
3) Press [F4](Enter), if system finds this point, the coordinates
of this point will be displayed, then you can press [F4](Yes);
60