Titan TTS2 Manual page 15

F1~F4 Soft Keys
0~9 Number keys
Star key
★
The side
Enter
key
ESC Exit /quit
◄► Left /right
▲▼ Up /down
0～9 Number
·~ - Symbols
Symbols on the display
Symbols
Vz Zenith Mode
Vo The mode that the vertical is displayed as zero when the
telescope is level in normal
Vh Vertical angle Mode (it is 0°00'00"when the telescope is
level. The angle of elevation is positive and the angle of
depression is negative.)
V% Slope Mode
HR Horizontal angle (right angle). dHR means the angle
difference of setting out.
HL Horizontal angle (anticlockwise increment)
HD Horizontal distance. dHD is to stake out horizontal
distance difference.
VD Elevation difference. dVD is to stake out difference
between elevation differences.
The characters at the bottom line of the
display indicate the meaning of the soft
keys.
Input numbers or characters or choose the
menu
In any measurement interface, you can
enter the star key interface .You can set the
contrast, lighting compensator and
parameters of distance measuring .
Receive and save the data input in the
dialogue and end the dialogue.
Save the current measurement data under
the basic measurement interface.
End the dialogue box without saving the
input，and return to the previous step
change the option in the select box
Data list page
Move the Cursor up and down in order.
Turn the page under the basic measurement.
Input number and characters and select one
of menu.
"0": Enter the electronic bubble interface
under the basic measurement.
Enter symbols, decimals and signs;
Enter the interface for input height.
Indication
14