Vertical Stainless Deflector Replacement - FPI I2450M Manual

installation
|
34

Vertical Stainless Deflector Replacement

1. Remove 2 front secondary air tubes / vermiculite baffles as per page 24.
2. Loosen the two 7/16'' bolts + nuts to remove / replace vertical baffle.
3. Repeat steps to install new vertical deflector.
NOTE: ENSURE BAFFLE IS PUSHED UP AS FAR AS POSSIBLE. TIGHT TO TOP OF FIREBOX.
34 |
Regency HI2450M
7/16'' Bolts
Slide left + down to remove.
Reverse to replace.
Remove 2 front air tubes
7/16'' Nuts
Vertical Deflector