Stainless Steel Smoke Deflector Installation - FPI I2450M Manual

Stainless Steel Smoke Deflector Installation

The stainless smoke deflector is located in the upper front area of the firebox. The deflector is held in place with 2 bolts
Prior to the first fire, ensure deflector is seated properly and secured with 2 hand tightened bolts.
Smoke Deflector
Smoke deflector is installed through the door
opening in location shown in diagram
To replace the deflector, loosen off both bolts and slide deflector upward and out. Install new deflector and hand tighten bolts. Ensure positive location of
the deflector prior to hand tightening.
WARNING: Operation of the unit with out proper installation of smoke deflector will void warranty.
Ensure deflector is seated so bolts are situated
at the top of the keyhole before tightening.
installation
Smoke deflector installed with 2 bolts.
Note: This is a view from the back of the unit
through the top.
Regency HI2450M
|
11
| 11