FPI I2450M Manual page 3

Date: 4/23/2019 – Original Issue
Date: 6/24/2021 – The following revisions were made per a request from EPA:
-Run 2 lab sample data page in Appendix A was cleaned up to reduce confusion with some
weights, no changes made to final catch numbers, see page 105 in Non-CBI report.
-The "Notes" section was edited to clarify conditions during pre-test conditioning burns, see page
5.
-The manufacturer's test burn instructions we added to Appendix A, see page 25 in Non-CBI
Report.
-The owner's manual was edited to provide more detail on proper operation, see pages 19 and 27
of the owner's manual for the I2450 and H2450, respectively, in Appendix B (Non-CBI report page
278 and 322, respectively).
-Cleaned up test run 3 data files in Appendix A, test run was aborted and some of the data is
incomplete/non-sensical due to calculation errors from a test that did not run to completion, see
pages 109-127 of Non-CBI report.
-Added Run 3 technician notes to Appendix A, notes from this aborted run were previously
omitted erroneously, see page 128 of Non-CBI Report.
-Added a drawing of the Firebox to the main body of the report, see page 12.
Date: 2/16/2022 – The following revisions were made per a request from EPA:
-The "Test Run Narrative" section was edited to clarify that test run 4 was appropriate and valid,
see page 9.
-The "Settings and Run Notes" section was edited to clarify that the low burn test was performed
at the lowest possible air setting, see page 10.
Page | 1
Revision Summary
Project # 19-469 Model: I2450M