Installing Your Insert
Your insert is very heavy and will require two or three
people to move it into position. The insert can be
made a little lighter by removing the cast iron door
by opening it and lifting it off its hinges. Be sure to
protect your hearth extension with a heavy blanket
or carpet scrap during the installation.
Convection Grills
The black convection grills are pre-installed on
this appliance.
If the optional nickel grills are being used, remove
the black grills and position the nickel grill on the
inside body face side and fasten using the bolts,
washers and nuts provided (2 per side) as shown
in the diagrams.
Note: The grill has a front and rear, the
holes on the front side have rounded
edges and the rear holes have flat
edges.
View from Rear of Insert
installation
Regency I2450M
|
9
|
9